Clash-Free by Design
Rigorous clash detection and resolution cycles across architectural, structural, and MEPF disciplines, with documented reports and sign-offs at every milestone.
BIM Services in USA
One coordinated model. Every discipline. Zero surprises on site.
Trusted by fabricators, erectors and general contractors across North America
BIM Services
Model it right. Build it once.
BIM Services in USA
Moldtek delivers Building Information Modeling (BIM) services in USA built for the way modern construction actually runs — fast, multi-disciplinary, and unforgiving of errors. Backed by over two decades of structural engineering and detailing experience, our BIM team develops intelligent, data-rich 3D models that connect architects, engineers, contractors, fabricators, and owners on a single coordinated platform. The result: fewer RFIs, fewer clashes discovered in the field, and predictable project delivery.
As a BIM modeling company in USA, we develop models from LOD 100 concept massing through LOD 500 as-built handover, aligned with ISO 19650 workflows, BIMForum LOD specifications, and each client’s BIM Execution Plan (BEP). Whether you need a fully coordinated federated model, discipline-specific modeling support, or clash-free construction documentation, our deliverables plug directly into your Common Data Environment, naming conventions, and sheet standards.
Discuss Your Project RequirementsOne coordinated model. Every discipline. Zero surprises on site.
Get Project Cost Estimate
25+Years of
Engineering
Engineering
The Challenge
Closing the Gaps Between Design and Construction
Most project overruns trace back to the same root cause — teams working from disconnected drawings instead of one coordinated model. Our BIM workflows close those gaps before they reach the field:
- 01
Early clash detection and resolution
Detecting and resolving inter-disciplinary clashes early through Navisworks-based clash detection, coordination meetings, and documented clash resolution logs — before issues reach the field.
- 02
The right LOD per stage
Developing models at the right Level of Development (LOD 100–500) for each project stage, so design intent, coordination, fabrication, and as-built needs are all met without over-modeling or gaps.
- 03
Model-derived quantities and BOQs
Producing accurate, model-derived quantity take-offs and BOQs that minimize material wastage and support dependable procurement and cost planning.
- 04
A single source of truth
Maintaining a single source of truth through Common Data Environment (CDE) workflows on Autodesk Construction Cloud / BIM 360, with controlled versioning and audit trails.
- 05
Aligned with international frameworks
Aligning every deliverable with international frameworks — ISO 19650, BIMForum LOD Specification, NBIMS-US, and client-specific BIM Execution Plans.
Why Moldtek
Why Project Teams Choose Moldtek BIM
Full LOD 100–500 Range
Model development across the full lifecycle — from concept massing and design development to fabrication-level detail and field-verified as-builts.
Speed Without Shortcuts
Standardized templates, content libraries, and offshore-scale teams deliver coordinated models on aggressive schedules without compromising QA.
Smarter Cost Structure
India-based production with US-based coordination gives clients top-tier BIM output at a fraction of onshore cost — with measurable reductions in rework.
Structural DNA
Two decades of steel detailing and structural engineering behind every model — we understand constructability, connections, and fabrication, not just geometry.
What Makes Us Unique
The Moldtek BIM Advantage
Coordination-driven BIM designed to compress schedules, cut rework, and keep every stakeholder building from the same model:
- Multi-disciplinary capability under one roof — architectural, structural, and MEPF modeling teams coordinated internally before models ever reach the client.
- Deep structural and fabrication expertise: our BIM models are informed by 20+ years of AISC-standard steel detailing, so what we model can actually be built.
- Strict adherence to ISO 19650 information management, BIMForum LOD definitions, and client BEPs, with deliverables in RVT, IFC, NWD/NWC, and DWG formats.
- Flexible engagement models — project-based delivery, dedicated BIM resources, or white-label production support for AEC firms and BIM consultancies.
- Proven US project delivery experience across stadiums, industrial plants, healthcare, and commercial construction.
Sectors
Sector Experience That Shapes Smarter Models
Different building types fail in different ways — and our modeling approach adapts to each. Sectors we deliver coordinated BIM for:
Commercial
- Coordinated architectural, structural, and MEPF models for offices, retail, and mixed-use developments.
- Clash-free construction documentation supporting fast-track delivery.
- Model-based quantities for accurate bidding and procurement.
Our Platforms
Powered by the Industry's Best Platforms
Our BIM production runs on the platforms your project teams already trust, guaranteeing accuracy, interoperability, and smooth data exchange with every stakeholder.
Autodesk Revit
Multi-discipline BIM authoring — architectural, structural, and MEPF modeling from LOD 100 to LOD 500.
Autodesk Navisworks
Federated model review, clash detection, and 4D construction sequencing.
Autodesk Construction Cloud / BIM 360
Common Data Environment for cloud collaboration, versioning, and issue tracking.
Tekla Structures
Fabrication-level structural steel modeling integrated with our detailing practice.
AutoCAD
2D documentation, CAD-to-BIM conversion, and legacy drawing support.
Autodesk ReCap Pro
Point cloud processing for Scan to BIM and as-built verification.
With these platforms, we deliver coordinated models, clash reports, quantity take-offs, and construction documents that integrate seamlessly with your project workflows — in RVT, IFC, NWD, DWG, and the formats your teams already use.
What We Deliver
From Concept to As-Built — What We Deliver
3D BIM Modeling (LOD 100–500)
Intelligent, parametric models for architectural, structural, and MEPF disciplines developed to the exact Level of Development your project stage demands.
BIM Coordination & Clash Detection
Federated model management, Navisworks clash runs, coordination meetings, and documented resolution — delivering clash-free, buildable designs.
Scan to BIM
Conversion of laser scan and point cloud data into accurate as-built Revit models for renovation, retrofit, and facility documentation.
4D & 5D BIM
Schedule-linked construction sequencing (4D) and cost-linked models with model-based quantity take-offs (5D) for planning and budget certainty.
Construction Documentation & Shop Drawings
Permit sets, construction documents, and coordinated shop drawings extracted directly from the model — accurate, consistent, and revision-controlled.
CAD to BIM & Revit Family Creation
Migration of legacy 2D drawings into intelligent BIM models, plus custom parametric Revit families and content libraries built to your standards.
Every Discipline
One Partner, Every Discipline
Specialized BIM solutions tailored precisely to your project requirements:
Architectural BIM Modeling
From schematic design to construction documents.
Structural BIM Modeling
Steel, concrete, and precast — fabrication-ready.
MEPF BIM Modeling
Mechanical, electrical, plumbing & fire protection coordination.
Scan to BIM / As-Built Modeling
Point cloud to intelligent Revit models.
BIM Coordination & Clash Management
Federated models, clash reports, issue tracking.
Standards
The Standards Behind Every Model
Information quality and model reliability come from discipline — our BIM practice is anchored in international standards and frameworks:
ISO 19650ISO 19650 (Parts 1 & 2) — Information management using BIM
BIMForum LODBIMForum Level of Development (LOD) Specification
NBIMS-USNational BIM Standard – United StatesUSA
AIA E203/G202AIA BIM protocols and contract documents (E203/G202)
AISCAISC standards for structural steel modeling and detailing
BEPClient-specific BIM Execution Plans (BEP), naming conventions, and CDE requirements, among others.
At Moldtek, we are committed to delivering coordination-driven BIM services that give our clients clash-free construction, dependable quantities, and models that keep working long after handover.
FAQs
FAQs on BIM Services
Answers to the questions our clients ask us most.
A BIM services company creates intelligent 3D building models that combine geometry with data — enabling design coordination, clash detection, quantity take-offs, construction documentation, and facility management across a project’s lifecycle.
We offer 3D BIM modeling (architectural, structural, MEPF), BIM coordination and clash detection, Scan to BIM, 4D/5D BIM, CAD-to-BIM conversion, Revit family creation, construction documentation, and as-built modeling — from LOD 100 through LOD 500.
Level of Development (LOD) defines how much reliable detail a model element carries. LOD 100 is conceptual massing; LOD 200 approximate geometry; LOD 300 accurate design-intent geometry; LOD 350 adds interfaces and connections for coordination; LOD 400 is fabrication-level; LOD 500 is field-verified as-built. We deliver at whichever LOD your project stage requires.
Autodesk Revit, Navisworks, AutoCAD, ReCap Pro, Autodesk Construction Cloud / BIM 360, and Tekla Structures. Deliverables are provided in RVT, IFC, NWD/NWC, DWG, and other formats per your BEP.
Clash detection identifies conflicts between building systems — for example a duct running through a beam — in the model, before construction. Resolving clashes digitally costs a fraction of fixing them in the field and prevents schedule delays, rework, and change orders.
Scan to BIM converts laser scan point cloud data of an existing building into an accurate, intelligent BIM model. It is essential for renovation, retrofit, expansion, and facility documentation projects where reliable as-built information is missing.
Yes. Our information management workflows align with ISO 19650 Parts 1 and 2, alongside BIMForum LOD Specification, NBIMS-US, and each client’s BIM Execution Plan.
Absolutely. We deliver to your BEP, naming conventions, shared coordinates, sheet standards, and Common Data Environment — whether that’s Autodesk Construction Cloud, BIM 360, or another platform.
4D BIM links the model to the construction schedule, letting teams visualize and optimize sequencing. 5D BIM links the model to cost, generating reliable quantity take-offs and enabling budget tracking as the design evolves.
By catching clashes before construction, producing accurate quantities that prevent over-ordering, compressing coordination cycles, and reducing RFIs and rework — savings that typically far exceed the cost of the BIM service itself.
Yes. Our teams have delivered coordinated models for stadiums, battery plants, and industrial facilities involving thousands of tons of steel, hundreds of erection sequences, and multi-fabricator coordination on fast-track schedules.
Our BIM practice is built on 20+ years of structural steel detailing and engineering. We model with constructability, connections, and fabrication in mind — so our models don’t just look coordinated, they build cleanly in the field.
Yes. Alongside project-based delivery, we offer dedicated BIM modelers and coordinators who work as an extension of your team, in your environment and standards.
Depending on scope: federated and discipline models, clash detection reports and resolution logs, construction documents, shop drawings, quantity take-offs/BOQs, 4D sequences, custom Revit families, and as-built models — all revision-controlled.
Start Your Project
Copyrights 2026 Moldtek Technologies.